Teco Westinghouse Electric Motor 1.5HP 460V 3600RPM 143TC TEFC

1.5HP 3600RPM 460V 143TC Ready TEFC

Product Code: APH1/52C

HP

1.5

Voltage

460

RPM

3600

Frame

143TC

Material

Cast Iron

Weight 46 lbs

$578 CAD

This product qualifies for FREE SHIPPING

Please Call For Availability

NEMA PREMIUM EFFICIENCY TEFC SEVERE DUTY
APH1/52C

1.5 HP
460 Voltage
3600 RPM
143TC Frame
3 Phase
Amps: 2
Enclosure TEFC
Efficiency 84
Drive End Bearing 6205ZC3
NonDrive End Bearing 6205ZC3

1500HP
3600, 1800, 1200 & 900RPM
Horizontal F1 Mount
60Hz, 460V or 575V
Totally Enclosed IP54 Design
NEMA Premium Efficiency
1.15 S.F. Sine Wave Power; 1.0 S.F. VFD Power
Class B Temperature Rise
Max Elevation 3300ft
Continuous Duty
40°C Ambient
Class F Insulation
Sound Pressure Level Complies with IEEE 841
Bearing Temperature Rise Below 45°C for 4P and 6P ratings; 50°C for 2P Motors
C3 Clearance Open Bearings with Regreaseable Provisions
Polyrex EM Grease
Aluminum Rotor up to 449T Frames; Copper/Copper Alloy 5000 and Larger
CastIron Frame and End Brackets
CastIron Conduit Box up to 449T Frames; Fabricated Steel Conduit Box 5000 Frames and Larger
NonSparking Plastic Fan up to 449T 4,6 & 8 Pole Motors; Bronze Fan 440TS 2 Pole Motors and 5000 Frames and Larger
Number of Leads 460V/575V: 3 Leads; Solderless Lug Terminals on All Leads
Grounding Terminal Inside Main Terminal Box and Provisions for Grounding Terminal on Motor Frame
Interchangeable F1 and F2 mounting up to 449T
Dual Drilled Feet for Longer Frames (i.e. 145T also Drilled for 143T) 449T and Below
Paint System: Zinc Chromate Epoxy Primer, Phenolic Rust Proof Base with Lacquer Top Coat
Paint System: Zinc Chromate Epoxy Primer, Phenolic Rust Proof Base with Lacquer Top Coat
Stainless Steel Hardware,  Breather Drains and Nameplate
Rubber Flinger on DE up to 280T; Copper Flinger on Both Ends 280TS and Larger
*HPE™ High Pulse Endurance Spike Resistant Wire
2 Dips Phenolic Alkyd Resin Varnish with Moisture Resistant Varnish
Winding RTD’s, Space Heaters and Provisions for Bearing RTD’s Standard 5000 Frames and Larger
CSA Certified for Class I, Division 2, Groups B, C & D (Class I, Zone 2, Groups IIB+H2, IIB and IIA)
CSA Certified for Class II, Division 2, Groups F & G (Zone 22, Groups IIIA & IIIB)
*Speed Ranges up to 10:1 CT, and 20:1 VT. Refer to data sheet for rating specific turn down ratios
*Meets NEMA MG1 Part 31.4.4.2
* Precautions should be taken to eliminate or reduce voltage spikes and shaft currents that may be imposed on the motor by the VFD as stated per NEMA MG1, Part 31.4.4.

Additional Information

Teco IEEE

pdf

Teco Warranty

Size: 67.63 KB
Hits: 88
Date added: 05-05-2022
pdf

Teco Manual

Size: 553.75 KB
Hits: 109
Date added: 05-05-2022
pdf

IEEE Feature Sheet

Size: 183.80 KB
Hits: 99
Date added: 05-05-2022
pdf

IEEE Brochure

Size: 601.69 KB
Hits: 87
Date added: 05-05-2022